10" aperture flat frame-in kits for (1) vertical CFL lamps. These are designed for use in non-insulated ceiling for general and task lighting. Heat sink aluminium socket housing, with vertically adjustable lamp holder may produce various focuses for different lamp types.
AVAILABLE TRIMS
Model Number |
Description |
LT-FT-V94-SM-WH |
10" Open Clear Reflector Trim for CFL Recessed Lights |
LT-FT-V941-SM-WH |
10" Clear Reflector with Regressed Lens in White Baffle Trim for CFL Recessed Lights |
LT-FT-V941-SM-BK |
10" Clear Reflector with Regressed Lens in Black Baffle Trim for CFL Recessed Lights |
LT-FT-V914-SM-WH |
10" Open Clear Reflector with White Baffle for CFL Recessed Lights |
LT-FT-V914-SM-BK |
10" Open Clear Reflector with Black Baffle for CFL Recessed Lights |
LT-FT-V922-SM-WH |
10" Clear Reflector with Clear Lens in Clear Reflector Collar for CFL Recessed Lights |
DESIGN FEATURES
MOUNTING FRAME
- Galvanized steel construction.
- Housing adjusts for ceilings up to 1-5/8" thick.
JUNCTION BOX
- Listed for through branch circuit wiring.(Max.8 No 12 AWG 90℃ branch circuit conductors. (4 in, 4 out)
- (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
- Ground wire provided on J-box.
REFLECTOR
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar and glass Lens for shower trim.
BAR HANGERS
- 24" Bar hangers provide stability and support on joists and T-Bar Grid ceilings.
- Housing can be positioned at any point within 24" joist span.
- Score lines allow "toolless" shortening for 12" joists. Bar hangers may be repositioned 90 degrees.
- Integral T-bar clips snaps onto T-bars and no additional clips are required.
TRIM RING
White plastic ring or plated chrome, satin nickel, natural steel color ring.
SOCKET CUP
Heat sink aluminum cup with vertically adjustable lampholder is used to control multiple beam spreads.
SOCKET
G24Q/GX24Q socket for use 4 pin DTT, TTT lamps.
LAMP
- Compact Fluorescent lamps.
- DTT-Double twin tube (Quad/CFQ)
- (1) 13W DTT (4 pin)
- (1) 18W DTT (4 pin)
- (1) 26W DTT (4 pin)
- TTT-Triple Twin Tube (CFTR)
- (1) 18W TTT (4 pin)
- (1) 26W TTT (4 pin)
- (1) 32W TTT (4 pin)
- (1) 42W TTT (4 pin)
- (1) 57W TTT (4 pin)
- (1) 70W TTT (4 pin)
BALLAST
- Class P Thermally protected by internal fuse (3 amp fast blow), Multi-volt electronic ballast or thermal cut-out switch in magnetic ballast.
- High Power Factor Multi-volt Electronic ballasts for 4 pin type compact fluorescent lamps mounted on J-box door for easy access from inside of fixture.
LISTING
- UL, c-UL listed for damp location.
- UL, c-UL listed for feed through.
OPTIONAL "QUICK CONNECT" PUSH-IN WIRE CONNECTORS
- Three "Quick Connectors"
- Pre-installed push-in wire connectors for fast and easy wiring.