A shallow economy designed wrap around fluorescent luminaire available for the use with two lamps in either two or four foot lengths. Low initial cost, maintenance free, this series also delivers excellent brightness control.
FEATURES & SPECIFICATIONS
INTENDED USE
A shallow economy designed wrap around fluorescent luminaire available for the use with two lamps in either two or four foot lengths. Low initial cost, maintenance free, this series also delivers excellent brightness control.
CONSTRUCTION
Completely die formed from heavy gauge cold rolled steel. Design embossed ends are locked and secures to the housing. Wireway cover snaps on or off without tools.
ELECTRICAL
Unless otherwise specified, ballasts are rapid start class “P” thermally protected, H.P.F., CBM-ETL. Optional ballasts available include: energy saving (ESB), electronic (ELB), dimming (DIM), low temperature (LW). Standard voltage on all fixtures is 120V 60Hz AC, or as specified. Sufficient knockouts are provided on the back and ends for all connections and through wiring. All fixtures bear U.L. labels.
MOUNTING
Suitable for individual or continuous run installations. May be surface or pendant mounted.
LISTING
Fixture & Ballast: UL Listed Ballast: Thermally protected, class P, HPF, Non PCB
DIFFUSERS
A crystal clear diffuser extruded from 100% virgin acrylic that will maintain its color under normal conditions, indefinitely. Linear prisms on the interior side walls direct the light ceilingwards, which can then refract back down, The bottom is composed of an evenly spaced pattern of conical prisms yeilding low brightness, glarefree diffused light. Diffuser is lift and shift for ease of relamping and cleaning and is capable of hanging down from either side of the housing.
RESOURCES AND DOWNLOADS
SKU | TF-207A217S |
---|---|
Weight | 16.00 LBS |
Light Source | T8 Fluorescent |
Fixture Size | 2' Linear |
Listings and Ratings | Class P,HPF,Non PCB,Thermally protected,UL Listed |
Ballast and Voltage | Residential 120V Ballast |
Housing
Completely die formed from heavy gauge cold rolled steel. Design embossed ends are locked and secures to the housing. Wireway cover snaps on or off without tools.
Mounting
Suitable for individual or continuous run installations. May be surface or pendant mounted.
Reflector
-
Resources
7" Wraparound Specification Sheet