The 4” Retrofit LED module&trim kit with E26 medium screw base for the 4” IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It’s designed for use with Lumtech# IH-410, IH-410ICA and the remodeled including other compatible most 4” housings classified by ETL. High efficacy LED with integral dimmable driver and the optical diffusion produces high lumen transmission and even illumination. Suitable for wet location.
LED MODULE & TRIM
- Durable aluminum extrusion heat sink with intergrated with COB(chip on board).
- Module construction includes LED, heat sink, lens, baffle trim.
- Available with baffle trims in white or black painted and clear or white reflectors.
- Impact-resistant plastic.
- High lumen transmission and diffusing for even illumination.
See Housing Compatibility section
- E26 medium screw-base Edison connector provides easy retrofit of incandescent housing.
- Also available GU24 base connector for compact fluorescent housing. (Optional)
- 120V LED Power Supply on-bed with customized IC chip.
- 10-100% triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches.
- Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module.
- Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded.
50,000hr of lamp life.
- ETL Listed.
- State of california Title 24
- Energy star Approved & Listed
Damp & Wet Location