4" aperture flat frame-in kits for (1) vertical CFL lamps. These are designed for use in non-insulated ceiling for general and task lighting. Heat sink aluminium socket housing, with vertically adjustable lamp holder may produce various focuses for different lamp types.
||4" Open Clear Reflector for CFL Recessed Lights
||4" Clear Reflector with Regressed Fresnel Lens in White Baffle for CFL Recessed Lights
||4" Clear Reflector with Regressed Fresnel Lens in Black Baffle for CFL Recessed Lights
||4" Kick Plate Wall Wash Clear Reflector for CFL Recessed Lights
||4" Open Clear Reflector with White Baffle for CFL Recessed Lights
||4" Open Clear Reflector with Black Baffle for CFL Recessed Lights
||4" Clear Reflector with Regressed Fresnel Lens in Clear Reflector for CFL Recessed Lights
- Galvanized steel Construction.
- Housing adjusts for ceilings up to 1-1/4" thick.
- Listed for through branch circuit wiring.(Max.8 No 12 AWG 90℃ branch circuit conductors. (4 in, 4 out)
- (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
- Ground wire provided on J-box.
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar and glass Lens for shower trim.
- 24" Bar hangers provide stability and support on joists and T-Bar grid ceilings.
- Housing can be positioned at any point within 24" joist span.
- Score lines allow "toolless" shortening for 12" joists. Bar hangers may be repositioned 90 degrees.
- Intergral T-bar clips snaps onto T-bar and no additional clips are required.
White plastic ring or plated chrome, satin nickel, natural steel color ring.
G24Q/GX24Q socket for use 4 pin DTT, TTT lamps.
Heat sink aluminum cup with vertically adjustable lampholder is used to control multiple beam spreads.
COMPACT FLUORESCENT LAMPS
- DTT-Double twin tube (Quad/CFQ)
- (1) 13W DTT (4 pin)
- (1) 13W DTT (4 pin)
- (1) 26W DTT (4 pin)
- TTT-Triple Twin Tube (CFTR)
- (1) 26W TTT (4 pin)
- (1) 18W TTT (4 pin)
- (1) 32W TTT (4 pin)
- Class P Thermally protected by internal fuse (3 amp fast blow), Multi-volt electronic ballast or thermal cut-out switch in magnetic ballast.
- High Power Factor Multi-volt Electronic ballasts for 4 pin type compact fluorescent lamps mounted on J-box door for easy access from inside of fixture.