The 6”Diecast Retrokit LED module & trim kit with E26 medium screw base is designed for the 5” and 6” IC/Airtight and Non-IC incandescent recessed downlight and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-Tech models IH-520ICA, IH-620ICA, IH-520, IH-620, shallow IH-640ICA, IH-640 and most 5” and 6” housings certified under UL1598 standard. High efficacy 120V DOB LED (Driver on Board) Module (Campcell ) with integral triac dimming capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location.
LED Module & Trim
- Efficient diecast aluminum heat sink/baffle with integrated LED DoB module.
- High reflectance White Baffle style Reflector improves beam distribution and uniformity.
- High impact translucent plastic lens.
- High lumen transmission and diffusing for even illumination.
- Dual torsion springs easily mount and adjust to compatible 5" & 6" recessed housings that have spring mounting tabs.
- See Housing Compatibility section
- E26 medium Edison connector provides easy retrofit of screw based incandescent housings.
- Optional GU24 base Adapter available for CFL housings.
- 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB).
- 10-100% triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches.
- Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents.
- Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 300W max load dimmer switch.
- Lamp Life: 5 years/50K hours.
- cETLus Wet Location
- ENERGY STAR
- California Title 24