The FH-V5 is a 5" aperture housing for (1) vertical CFL lamps. The FH-V5 is designed for use in non-insulated ceiling or for insulated ceiling but insulation must be kept 3" from all sides for the housing.
||5" Clear Specular Reflector for Max. Reflection
||5" Clear Reflector with White Baffle
||5" Shower Albalite Lens with Clear Reflector
||5" Shower Round Opal Lens with Clear Reflector
- Single wall aluminum housing.
- 7-9/16" height allows use in 2" x 8" joist construction.
- Housing adjusts for ceilings up to 1-1/4" thick.
- Listed for through branch circuit wiring.(Max.8 No 12 AWG 90°C branch circuit conductors. (4 in, 4 out).
- (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
- Ground wire provided on J-box.
Anozided clear, haze, gold, champange, pewter color finished full reflectors. And anodized reflectors with black and white milled groove baffle color.
White plastic ring or plated chrome, satin nickel, polished brass, natural steel color ring.
- Galvanized steel construction.
- 12"L x 7-5/8"W
- G24Q/GX24Q base socket for use 4pin DTT or TTT lamps.
- (2) legs spring clips snaps into socket one socket hole on the top of all of type "-A" trims.
- Maximum extension of 24" allows for extra distance between joists.
- Housing can be positioned at any point within 24" joists span.
- Score lines allow "tooless" shortening for 12" joists. Bar hangers may be repositioned 90 degrees.
- Integral T-bar clips snaps onto T-bars and no additional clips are required.
Pre-installed nail bars with vertical slots areused to evenly align the bars horizontally after nailing halfway into wood joists.
- Compact Fluorescent lamps.
- DTT-Double twin tube (QUAD/CFQ)
- (1) 13W DTT (4 pin)
- (1) 18W DTT (4 pin)
- (1) 26W DTT (4 pin)
- TTT-Triple Twin Tube (CFTR)
- (1) 18W TTT (4 pin)
- (1) 26W TTT (4 pin)
- (1) 32W TTT (4 pin)
- Class P Thermally protected by internal fuse (3 amp fast blow), Multi-volt electronic ballast or thermal switch in magnetic ballast.
- High Power Factor Multi-volt Electronic ballasts for 4 pin type compact fluorescent lamps or magnetic ballast for 2 pin lamps mounted on J-box door for easy access from inside of fixture.
- UL, c-UL listed for damp location.
- UL, c-UL listed for feed through.
OPTIONAL "QUICK CONNECT" PUSH-IN WIRE CONNECTORS
- Three "Quick Connectors"
- Pre-installed push-in wire connectors for fast and easy wiring.