The FH-HA8 is a 8" aperture frame-in kit for (1) or (2) horizontal CFL lamps, for wide beam area and task lighting. The FH-HA8 offers a wide choice of trim types including reflector, lensed and wall wash trims.
AVAILABLE TRIMS
Model Number |
Description |
LT-FT-H84C |
8" Open Clear Reflector for CFL Recessed Lights |
LT-FT-H841CW |
8" Clear Reflector with Regressed Fresnel Lens in White Baffle for CFL Recessed Lights |
LT-FT-H841CB |
8" Clear Reflector w/ Regressed Fresnel Lens in Black Baffle for CFL Recessed Lights |
LT-FT-H836C |
8" Kick Plate Wall Wash Clear Reflector for CFL Recessed Lights |
LT-FT-H814CW |
8" Open Clear Reflector with White Baffle for CFL Recessed Lights |
LT-FT-H814CB |
8" Open Clear Reflector with Black Baffle for CFL Recessed Lights |
LT-FT-H822CC |
8" Clear Reflector with Fresnel Lens in Clear Reflector Collar for CFL Recessed Lights |
DESIGN FEATURES
MOUNTING FRAME
- 20-gauge CRS mounting ring, black-painted. 1-5/8" deep collar may use for various thickness of ceiling materials.
JUNCTION BOX
- Listed for through branch circuit wiring.(Max.8 No 12 AWG 90℃ branch circuit conductors. (4 in, 4 out).
- (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box.
TRIM RING
- Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar.
REFLECTOR
- White plastic ring or plated chrome, satin nickel, polished brass, natural steel color ring.
SOCKET
- G24Q/GX24Q socket for use 4 pin DTT, TTT lamps.
SOCKET HOUSING
- Installed (4 pin) thermoplastic lampholders in stamped galvanized steel housing attached on the reflector top.
MOUNTING CHANNEL BRACKET
- Commercial mounting kit provided up to 5" vertical adjustment, which accommodates 1/2" EMT conduit, optional HB-24 or HBC-24 bar hanger or lathing channels for T-bar grid or concealed spline ceiling.
LAMP
- Compact Fluorescent lamps
- DTT-Double twin tube (Quad/CFQ)
- (1) or (2) 13W DTT (4 pin)
- (1) or (2) 18W DTT (4 pin)
- (1) or (2) 26W DTT (4 pin)
- TTT-Triple Twin Tube (CFTR)
- (2) 18W TTT (4 pin)
- (2) 26W TTT (4 pin)
- (2) 32W TTT (4 pin)
- (2) 42W TTT (4 pin)
- (1) 32W TTT (4 pin)
- (1) 42W TTT (4 pin)
BALLAST
- Class P Thermally protected by internal fuse (3 amp fast blow), Multi-volt electronic ballast or thermal cut-out switch in magnetic ballast.
- High Power Factor Multi-volt Electronic ballasts for 4 pin type compact fluorescent lamps mounted on J-box door for easy access from inside of fixture.
LISTING
- UL, c-UL listed for damp location.
- UL, c-UL listed for feed through.
OPTIONAL "QUICK CONNECT" PUSH-IN WIRE CONNECTORS
- Three "Quick connectors"
- Pre-installed push-in wire connectors for fast and easy wiring.