8” aperture flat frame-in kits for (1) vertical CFL lamps. These are designed for use in non-insulated ceiling for general and task lighting. Heat sink aluminium socket housing, with vertically adjustable lamp holder may produce various focuses for different lamp types.
||8" Open Clear Reflector for CFL Recessed Lights
||8" Clear Reflector with Regressed Fresnel Lens in White Baffle for CFL Recessed Lights
||8" Clear Reflector with Regressed Fresnel Lens in Black Baffle for CFL Recessed Lights
||8" Kick Plate Wall Wash Clear Reflector for CFL Recessed Lights
||8" Open Clear Reflector with White Baffle Trim for CFL Recessed Lights
||8" Open Clear Reflector with Black Baffle Trim for CFL Recessed Lights
||8" Clear Reflector with Regressed Fresnel Lens in Clear Reflector for CFL Recessed Lights
- Galvanized steel construction.
- Housing adjusts for ceilings up to 1-1/4" thick.
- Listed for through branch circuit wiring.(Max.8 No 12 AWG 90℃ branch circuit conductors. (4 in, 4 out)
- (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
- Ground wire provided on J-box.
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar and glass Lens for shower trim.
- 24" Bar hangers provide stability and support on joists and T-Bar Grid ceiling.
- Housing can be positioned at any point within 24" joist span.
- Score lines allow "tooless" shortening for 12" joists. Bar hangers may be repositioned 90 degrees.
- Integral T-Bar clips snaps onto T-bars and no additional clips are required.
White plastic ring or plated chrome, satin nickel, natural steel color ring.
Heat sink aluminum cup with vertically adjustable lampholder is used to control multiple beam spreads.
G24Q/GX24Q socket for use 4 pin DTT, TTT lamps.
- Compact Fluorescent lamps.
- DTT-Double twin tube (Quad/CFQ)
- (1) 13W DTT (4 pin)
- (1) 18W DTT (4 pin)
- (1) 26W DTT (4 pin)
- TTT-Triple Twin Tube (CFTR)
- (1) 18W TTT (4 pin)
- (1) 26W TTT (4 pin)
- (1) 32W TTT (4 pin)
- (1) 42W TTT (4 pin)
- (1) 57W TTT (4 pin)
- (1) 70W TTT (4 pin)
- Class P Thermally protected by internal fuse (3 amp fast blow), Multi-volt electronic ballast or thermal cut-out switch in magnetic ballast.
- High Power Factor Multi-volt Electronic ballasts for 4 pin type compact fluorescent lamps mounted on J-box door for easy access from inside of fixture.
- UL, c-UL listed for damp location.
- UL, c-UL listed for feed through.
OPTIONAL "QUICK CONNECT" PUSH-IN WIRE CONNECTORS
- Three "Quick Connectors"
- Pre-installed push-in wire connectors for fast and easy wiring.