The DuraGuard 9X9Q Small Vandal Resistant Ceiling Canopy luminaire is available for surface or pendant mounting configurations with an optical distribution designed specifically to replace HID lighting systems up to 100w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 14 feet can be used based on light level and uniformity requirements.
Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Two Sides & Back, Nickel-Plated Stainless Steel Hardware.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. IP65 Sealed LED Compartment.
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Standard Clear Polycarbonate Prismatic or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit.
Array: 21.7w, System: 25w (100w HID Equivalent)
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
5-Year Warranty for -40°C to +40°C Environment.