The DuraGuard SWPPCQ general purpose wall pack luminaire provides optically controlled wide spread light distribution designed to replace HID lighting systems up to 100w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be used based on light level and uniformity requirements.
DESIGN FEATURES
HOUSING
Die Cast Gasketed Aluminum Housing with ½˝ Coin Plugs, Nickel-Plated Stainless Steel Hardware.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment.
FINISH
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
LENS
Prismatic Polycarbonate Hinged Diffuser with UV Inhibitors.
MOUNTING OPTIONS
Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit or Optional Wall Mount Plate.
DuraLED LED
Aluminum Boards
WATTAGE
Array: 22.7w, System: 27.6w (100w HID Equivalent)
DRIVER
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
CONTROLS
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
WARRANTY
5-Year Warranty for -40°C to +40°C Environment.