DuraLED low profile large surface mount, 45 watts, 5,500-5,800 lumens, available in 4000K or 5000K color temperature (CCT), 5-year warranty.
The DuraGuard VN44Q Low Profile Large Surface Mount luminaire is available with an optical distribution designed specifically to replace HID lighting systems up to 175w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements.
SPECIFICATIONS AND FEATURES
Die-Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Three Sides & Back, Nickel-Plated Stainless Steel Hardware.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. IP66 Sealed LED Compartment.
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
SoftLED Low Profile LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens.
Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit.
Array: 45.4w, System: 53.7w (175w HID Equivalent)
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
5-Year Warranty for -40°C to +40°C Environment.
|Driver Type||120-277V, 50/60Hz or 347-480V, 50/60Hz|
|Total Input Watts||45|