The DuraGuard WP9Q general purpose wall pack luminaire provides optically controlled wide spread light distribution designed to replace HID lighting systems up to 70w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings, apartment complexes and medical facilities. Mounting heights of 8 to 12 feet can be used based on light level and uniformity requirements.
Stamped Galvanized Back Plate with White Powdercoat Finish. Molded Polycarbonate Front Housing. 120V Photocell Included. Fixture is for wired 120V Standard.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. ADA Compliant.
Polycarbonate Front Housing in Bronze with White Powdercoat Finish Back Plate.
Standard Clear Polycarbonate Prismatic Lens
Mount Directly Over a 4˝ Recessed Outlet Box. Threaded Stem and Nut Included.
Array: 7.3w; System: 9.2w (70w HID Equivalent)
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
5-Year Warranty for -40°C to +40°C Environment.