DuraGuard amber small hampton kitty hawk wall light, 81 watts, 2,700-3,900 lumens, tempered clear flat glass lens, 5 years warranty.
The DuraGuard Amber Series KH25Q luminaire is available in two wattages with a wide choice of mounting configurations and an IES Type V distribution designed to replace HID lighting systems from 150w to 250w MH or HPS for wildlife or security applications requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required for wildlife protection. Typical applications include general area, parking, flood, security, and accent lighting for retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 14 to 25 feet can be used based on light level and uniformity requirements.
ACCESSORIES
Model # | Description |
DG-KH20RPZ | Die-Cast Adaptor for 3˝ to 4˝ Round Poles |
DG-PTSB1SZ | Single Pole Tenon Spoke Bracket, 2⅜″ Horizontal Mounting Arm |
DG-PTSB290SZ | Twin Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
DG-PTSB2180SZ | Twin Pole Tenon Spoke Bracket, 2⅜″ Horizontal 180° Mounting Arms |
DG-PTSB390SZ | Triple Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
DG-PTSB3120SZ | Triple Pole Tenon Spoke Bracket, 2⅜″ Horizontal 120° Mounting Arms |
DG-PTSB490SZ | Quad Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
DG-KH20WMZ | Die-Cast Wall Mount Adaptor, Bronze Powder Finish |
DG-P18131 | Twist-Lock Non-Shorting (Open) Cap |
DG-P18132 | Twist-Lock Shorting Cap |
DG-P18140 | Instant Twist Lock Photocell, 110-140V |
DG-P18142 | Instant Twist Lock Photocell, 105-287V |
DG-P18150 | 120VAC Time Delay Twist Lock Photocell |
DG-P18152 | 277VAC Time Delay Twist Lock Photocell |
DG-KH25WG | Wire Guard (KH25WG) |
DG-KH25GSZ | Aluminum Glare/House Side Shield (KH25GSZ) |
DG-ACCHSG1Z | Die Cast Accessory Housing |
DESIGN FEATURES
HOUSING
Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment.
FINISH
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
LENS
Tempered Clear Flat Glass Lens
MOUNTING OPTIONS
Mounts with Kitty Hawk Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed).
DuraLED LED
Aluminum Boards
WATTAGE
81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.)
DRIVER
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
CONTROLS
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
WARRANTY
5-Year Warranty for -40°C to +50°C Environment.
RESOURCES AND DOWNLOADS
SKU | DG-KH25QF1X81 |
---|---|
Weight | 12.00 LBS |
Light Source | LED |
Fixture Size | Other |
Driver Type | 120-277v, 347-480v |
Lumen Output | 2,700-3,900 |
Total Input Watts | 81 |