LED large hampton kitty hawk area, wall and flood light, 167 or 256 watts, available in 3000K, 4000K, or 5000K color temperature (CCT), 5-year warranty for -40°C to +50°C environment.
The DuraGuard KH45Q luminaire is available in two wattages with a wide choice of mounting configurations and optical distributions designed to replace HID lighting systems from 250w to 1000w MH or HPS. Typical applications include general area, parking, flood, security, and accent lighting for retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 16 to 35 feet can be used based on light level and uniformity requirements.
MOUNTING ACCESSORIES
| Model # | Description |
| DG-KH40WMZ | Die-Cast Wall Mount Adaptor (KH40WMZ) |
| DG-KH40RPZ | Die-Cast Adaptor for 4" to 6" Round Poles |
| DG-PTSB1SZ | Single Pole Tenon Spoke Bracket, 2⅜″ Horizontal Mounting Arm |
| DG-PTSB290SZ | Twin Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
| DG-PTSB2180SZ | Twin Pole Tenon Spoke Bracket, 2⅜″ Horizontal 180° Mounting Arms |
| DG-PTSB390SZ | Triple Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
| DG-PTSB3120SZ | Triple Pole Tenon Spoke Bracket, 2⅜″ Horizontal 120° Mounting Arms |
| DG-PTSB490SZ | Quad Pole Tenon Spoke Bracket, 2⅜″ Horizontal 90° Mounting Arms |
ACCESSORIES
| Model # | Description |
| DG-ACCHSG1Z | Die Cast Accessory Housing |
| DG-ACCHSG3 | Bronze Polycarbonate Housing |
| DG-KH45WG | Wire Guard, Stainless Steel Construction |
| DG-KH45GSZ | Aluminum Glare/House Side Shield (KH45GSZ) |
| DG-P18131 | Twist-Lock Non-Shorting (Open) Cap |
| DG-P18132 | Twist-Lock Shorting Cap |
| DG-P18140 | Instant Twist Lock Photocell, 110-140V |
| DG-P18142 | Instant Twist Lock Photocell, 105-287V |
| DG-P18150 | 120VAC Time Delay Twist Lock Photocell |
| DG-P18152 | 277VAC Time Delay Twist Lock Photocell |
DESIGN FEATURES
HOUSING
Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware.
LISTING & RATINGS
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment.
FINISH
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
LENS
Tempered Clear Flat, SoftLED Flat Glass Lens, or Tempered Clear Flat Prismatic Glass Lens.
MOUNTING OPTIONS
Mounts with Kitty Hawk Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed)
DuraLED
Aluminum Boards
WATTAGE
- 167w: Array: 167.3w, System: 177w (250-400w HID Equivalent)
- 256w: Array: 255.7w, System: 281w (400-1000w HID Equivalent)
DRIVER
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
CONTROLS
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with DuraGuard Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
WARRANTY
5-Year Warranty for -40°C to +50°C Environment.
RESOURCES AND DOWNLOADS
| SKU | DG-KH45Q |
|---|---|
| Weight | 33.00 LBS |
| Light Source | LED |
| Fixture Size | Other |
| Color Rendering Index (CRI) | 80 |
| Driver Type | 120-277V, 347-480V |
| Total Input Watts | 167 |
Reviews
Write a Review
