4ft. lamp ready 4xT8 single ended utility wrap, 12 watts, sockets are wired in series via non-shunted sockets, ceiling or wall mounted, 5 years limited warranty.
PRODUCT DESCRIPTION
The MaxLite “Lamp Ready” Utility Wrap series provides Architects, Specifiers, and Buyers with a UL listed fixture engineered to operate the latest Single/Double ended LED T8 lamps supplied separately. Offering classic prismatic diffuser, with post painted finish, these fixtures come pre-wired for single ended operating LED lamps for contractor ready installation as new or remodel fixtures.
Single ended or Dual mode (Single/Double ended) T8 internal driver lamps (4’) under 17W must be purchased separately from Maxlite for this product.
FEATURES
- Lead wires are 7’ for tandem wiring, eliminating back and end knockouts.
- Sockets are wired in series via non-shunted sockets
- Ceiling or wall mounted
- Option “MSO” on/off occupancy sensor available
- Cable kits available for suspended use
CONSTRUCTION
- Engineered and UL rated to take up to 22w per set of lamp holders
- Damp &indoor rated use.
- Post fab painted housing and prismatic lens standard.
- Wiring IS 18 AWG solid to allow 120-277v operation where lamp specification allows
- Sockets rated to 660w , 600V, UL Listed
WARRANTY
- 5-year standard warranty* (see terms at www.maxlite.com/warranties)
RESOURCES AND DOWNLOADS
12 Watt Lamp Ready Utility Wrap Fixture Spec SheetInstallation Instructions
| SKU | MX-LSU4XT8USE4812 |
|---|---|
| Weight | 7.50 LBS |
| Light Source | T8 LED |
| Fixture Size | 4' Linear |
| Driver Type | 120-277V |
| Total Input Watts | 12 |
Reviews
Write a Review
