4ft. lamp ready 3xT8 LED single ended vapor tight, 22 watts per lamp, stainless steel spec grade hasps and clips, suitable for wet locations, 5 years limited indoor/3 years limited outdoor warranty.
PRODUCT DESCRIPTION
The MaxLite Lamp Ready Vapor tight series provides Architects, Specifiers, and Buyers with a UL listed fixture
engineered to operate the latest Single/Double ended LED T8 lamps supplied separately. Offering classic IP65 ratings, with spec grade Stainless steel latches, these fixtures come pre-wired for single ended operating LED lamps for contractor ready installation as new or remodel fixtures
Single ended or Dual mode (Single/Double ended) T8 internal driver lamps (4’) under 17W must be purchased separately from Maxlite for this product.
FEATURES
- Stainless Steel spec grade hasps and clips
- Lead wires are 7’ for tandem wiring, eliminating back and end knockouts.
- Sockets are wired in series via non-shunted sockets
- Ceiling or wall mounted
- Surface mount brackets included
CONSTRUCTION
- Engineered and UL rated to take up to 22w per set of lamp holders
- Pour in place silicone seal provides hermetically sealed envelope for wet environments
- Polycarbonate White Housing and clear lens standard.
- Wiring is 18 AWG solid to allow 120-277v operation where lamp specification allows
- Sockets rated to 660w , 600V, UL Listed
WARRANTY
- 5-year standard warranty* (see terms at www.maxlite.com/warranties)
- Excludes EM/MS versions; component warranty applies.
- Product may be eligible for warranty extension to 10 years for an additional fee. Limitations apply, contact MaxLite for details.
RESOURCES AND DOWNLOADS
SKU | MX-LSV3XT8USE4806 |
---|---|
Weight | 6.50 LBS |
Light Source | T8 LED |
Fixture Size | 4' Linear |
Driver Type | 120-277V |
Total Input Watts | 22 |