VSA4 series 4-foot vaporproof strip fluorescent, impact resistant acrylic lens, 2 lamps 32W T8, standard BF instant start ballast, high efficiency multi-volt, no FIO's, w/o power cord, mounting straps included.
VSA4 series 4’ fluorescent vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. This fixture operates up to three T8 or T5HO lamps, and as a standard feature, it comes with a Howard ballast.
APPLICATIONS
- Entrance Lighting
- Car Washes
- Public Access
- Parking Structures
- Beverage Industry
- Food Processing
- Construction Sites
- Industrial Lighting
DESIGN FEATURES
- One-piece upper body; no seams to crack, break, or leak
- Reinforced fiberglass body is rugged and corrosion resistant
- 5VA Flammability Rating
- White plastic latches standard
- Eight latches for positive lens retention
- Latches designed to accept screws to make enclosure tamper resistant
- White Polycarbonate latches accepts #4 - 1/2” screw
- Stainless steel latches accepts #6 - 3/8” screw (optional)
- White polyethylene molded end plugs for use as knockouts
- High gloss, baked enamel reflective front
GASKET
- Closed cell polyester gasket
- Poured gasket seamlessly fills channel for maximum seal
- Gasket has dry skin that will not stick to the mating surface
- High gasket compression recovery ensures a solid seal over life of fixture
DIFFUSER
- Injection molded for maximum strength and precise detail
- Lineal prisms on sides reduce glare
- Continuous formed perimeter provides for positive seal
- Materials:
- Option A: 100% Virgin Impact Resistant Acrylic
- Long lasting clarity and resistance to weathering
- Option P: UV Stabilized Polycarbonate
- Maximum impact resistance
- Option D: Deep Lens, Impact Resistant Clear Acrylic with diffused ends
- Option F: Deep Lens, Impact Resistant Frosted Acrylic
INSTALLATION
- Shipped fully wired with Howard ballast
- Easy access to wiring compartment and ballast via removable gear tray
- Gear tray tethered to housing by two lanyards for extra safety
- Knockouts on each end
- Spring-mount, stainless steel bracket allows for surface or chain mount
- Brackets Install first, then snap securely onto fixture
- NEC compliant luminaire power disconnect standard
BALLAST
- Electronic, Inherent Thermal Protection, Class P, Sound rated A
- UL Listed
QUALITY ASSURANCE
System Tested, Designed, Approved, and Manufactured by Howard Lighting Products in Mendenhall, Mississippi.
| SKU | HL-VSA4A232ASEMV000000I |
|---|---|
| Weight | 11.25 LBS |
| Light Source | T8 Fluorescent |
| Fixture Size | 4' Linear |
Housing
No
Mounting
No
Reflector
No
Resources
No
Reviews
Write a Review
