4", Non-IC, Remodel Frame-in Kit Downlight with Interchangeable Reflector Trims - UZTD Driver

The LEDH-RFK4 is a 4" LED , Remodel Frame-in kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W or 23W, high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.

AVAILABLE TRIMS

DESIGN FEATURES

LED MODULE & TRIM
Painted, extruded aluminum heat sink designed to facilitate efficient heat dissipation for superior thermal management and reliability.
LED engine includes LED, heat sink and lens assembly.
Heavy gauge aluminum reflector anodized in clear haze or white paint finishes. Multiple trim styles and finishes are available.

LED DRIVER
Universal, 120~277V input, high efficacy drivers with dimming capability by ① a Triac 120V low voltage electronic dimmer switches or ② 0-10V, Triac & ELV dimmer switches.
Drivers feature power factor >.90, THD <20% with integral thermal protection to sense over temperature or electrical issues.
Driver mounts externally to the module to allow future replacement or upgrading if desired.

REMODEL CLIPS
3 remodel clips secure housing into the ceiling and accommodates 1/2” and 5/8” ceiling materials.

JUNCTION BOX
Listed for through branch circuit wiring. (Max.8 No 12 AWG 90℃branch circuit conductors: 4 in, 4 out).
(5) 1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps.
Ground wire provided on J-box.

OPTIONS
Emergency battery back-up : Available in mounted to fixture or remote, adjacent to luminaire (consult with factory for space requirements).

WARRANTY
LED Module: 5 years/50K hours
Product/Driver: 3 years

LISTING
ETL Listed.
State of california Title 24
Energy star Approved & Listed