Line Voltage Wall Switch Sensor - Passive Infrared & Photocell, Partial Auto On

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting is less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive in infrared technology and digital signal processing techniques to provides unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a additional to an on/off button.

COVERAGE PATTERNS

• 30" to 48" (0.76 - 1.22 m) recommended mounting height
• Wall to wall (~180 degree) coverage
• Small motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft2
• Large motion (e.g., walking) detection greater than 36 ft (10.97 m), ~2025 ft2
• Overlapping acoustic detection of occupants over entire coverage area
• Advanced signal proccesing filters out nuisance noises while not effecting overall sensitivily

APPLICATIONS

A wall switch sensor is typically used to retrofit an existing wall switch in a small room or enclosed space. A Passive Infrared (PIR) only sensor is sufficient for spaces where line of site is maintained and occupants are periodically moving (e.g., copy rooms, storage rooms). Dual technology sensors are necessary where occupants may be partially blocked from the sensor’s direct view or where they may be stationary (e.g., private offices or restrooms with stalls).

• Private Restrooms
• Copy Rooms
• Restroom with Stalls
• Small Meeting Room
• Small Office
• Vestibule
• Storage Room
• Break Room

SPECIFICATIONS

• Operating Voltage: 120/277 VAC, 50/60 Hz
• Load Ratings: MAX: 800W @ 120VAC 1200W @ 277VAC
  MIN: None
• Load Types: LED Driver/Lamps CFL, Electronic/Magnetic Ballasts (Fluorescent) Tungsten (Incandescent)
• Dimming Compatibility: 0-10 VDC ballasts or drivers compliant with IEC 60929 Annex E.2
• Dimming Load: - 50 mA (sink only)
• Operating Temp: 32°F to 122°F (0°C to 50°C) - Standard -40° F/C (with -HE Option)
• Relative Humidity: 0-95% Non-Condensing, Indoor Use Only
• Size/Weight: 2.74”H x 1.68”W x 1.39”D (6.96 x 4.27 x 3.53 cm) Not Including Mounting Strap 4.5 oz
• Mounting: Single Gang Switch Box