10" HID Vertical Flat Recessed Light Frame-in kit 120V/277V Electronic MH Ballast for 100W Metal Halide Lamp LT-MH-VA9100E

10" aperture architectural frame-in kits for vertical R, PS, PAR, A Type incandescent lamps. These are designed for use in non-insulated ceiling for general lights on floor and tas lighting with deep concealed lamps.

AVAILABLE TRIMS

DESIGN FEATURES

HOUSING KIT

• C-UL listed, Non-IC, thermally proteted housing for vertical R, PS, PAR, A type incandescent lamps.
• 20-gauge CRS mounting ring, black painted. Housing adjusts for ceilings up to 1-5/8" thick.

JUNCTION BOX

• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90°C branch circuit conductors. (4 in, 4 out)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.

REFLECTOR
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar and glass lens for shower trim.

TRIM RING
White metal ring plated chrome, satin nickel, natural plated screw shell.

SOCKET
Medium base porcelain socket with nickel plated screw shell.

SOCKET CUP
Heat sink aluminum cup with vertically adjustable lampholder is used to control multiple beam spreads.

THERMAL PROTECTOR
Self resetting thermal detector on J-box deactivates fixture if overheating occurs due to improper lamping or mis-applied insulation.

MOUNTING CHANNEL BRACKET
Commercial mounting kit provided up to 5" vertical adjustment, which accommodates 1/2" EMT conduit, optional HB-24 or HBC-24 bar hanger or lathing channels for T-bar grid or concealed spline ceiling.

LISTING

• UL, c-UL listed for damp location.
• UL, c-UL listed for feed through.