10" HID Vertical Flat Recessed Light Frame-in kit 120V/277V Electronic MH Ballast for 150W Metal Halide Lamp LT-MH-HF9150E

10" aperture flat frame-in kits for horizontal A, PS Type incandescent lamps. These are designed for use in non-insulated ceiling for general lights on floor and tas lighting with deep concealed lamps.

AVAILABLE TRIMS

DESIGN FEATURES

HOUSING KIT

• C-UL listed, NON-IC, thermally protected housing for horizontal A, PS type incandescent lamps.
• 1-5/8" deep collar may use for various thickness of ceiling.

JUNCTION BOX

• Listed for through branch circuit wiring. (Max.8 No 12 AWG 90°C branch circuit conductors. (4 in, 4 out)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.

REFLECTOR
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar.

TRIM RING
White metal ring plated chrome, satin nickel, natural steel color ring.

SOCKET
Medium base porcelain socket with nickel plated screw shell.

BAR HANGERS

• 24" Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
• Housing can be positioned at any point within 24" joist span.
• Score lines allow "tooless" shortening for 12" joists. Bar hangers may be repositioned 90 degrees.
• Integral T-bar clips snaps onto T-bars and no additional clips are required.

THERMAL PROTECTOR
Self resetting thermal detector on J-box deactivates fixture sit overheating occurs due to improper lamping or mis-appplied insulation.

LISTING

• UL, c-UL listed for damp location.
• UL, c-UL listed for feed through.

OPTIONAL "MOUNTING CHANNEL BRACKET"

• Commercial mounting kit provided up to 5" vertical adjustment, which accommodates 1/2" EMT conduit, optional HB-24 or HBC-24 bar hanger or lathing channels for T-bar grid or concealed spline ceiling.