10" HID Vertical Flat Recessed Light Frame-in kit 120V/277V Electronic MH Ballast for 175W Metal Halide Lamp LT-MH-VAR9175E

10" aperture remodel frame-in kits for vertical R, PS, PAR, A Type incandescent lamps. These are designed for use in non-insulated ceiling for general lights on floor and tas lighting with deep concealed lamps.

APPLICATION
The 10" is designed for use in non-insulated existing ceiling or for existing insulated ceilings where insulation can be kept 3" away from all sides of the housing. It can be installed from below the ceiling.

AVAILABLE TRIMS

DESIGN FEATURES

HOUSING KIT

• C-UL listed, NON-IC, thermally protected housing for vertical R, PS,PAR, A type incandescent lamps.
• 20-gauge CRS mounting ring, black painted. Housing adjusts for ceilings up to 1/2" thick.

JUNCTION BOX

• Listed for through branch circuit wiring.(Max.8 No 12 AWG 90°C branch circuit conductors. (4 in, 4 out)
• (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.

REFLECTOR
Anodized clear, haze, gold, champagne, pewter color finished full reflectors. And anodized reflectors with black or white milled groove baffle collar.

TRIM RING
White metal ring plated chrome, satin nickel, polished brass, natural steel color ring.

THERMAL PROTECTOR

• Self resetting thermal detector on J-box deactivates fixture if overheating occurs due to improper lamping or mis-applied insulation.
• Install varied detectors according to input voltages.

REMODEL CLIPS
3 remodel clips secure housing and accommodates 1/2" and 5/8" ceiling materials.

LISTING

• UL, c-UL listed for damp location.
• UL, c-UL listed for feed through.

SOCKET
Medium base porcelain socket with nickel plated screw shell.

SOCKET CUP
Heat sink aluminum cup with vertically adjustable lampholder is used to control multiple beam spreads.