SERIES SUMMARY
| Model | Voltage(Vdc) | Current(mAdc) | Watts | Lumens |
| BLEDEM-CP-800 | 20-50 | 250-100 | 5.0 | 800 |
| BLEDEM-CP-1200 | 20-50 | 390-156 | 7.8 | 1250 |
| BLEDEM-CP-1600 | 20-50 | 535-214 | 10.7 | 1700 |
| BLEDEM-CP-2000 | 20-50 | 685-274 | 13.7 | 2200 |
| BLEDEM-CP-2400 | 20-50 | 850-340 | 17.0 | 2700 |
DESIGN FEATURES
ILLUMINATION
- Provides constant power output to the load during emergency mode operation.
- Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD.
ELECTRICAL
- Dual 120V/277V standard.
- Charge rate/power “ON” LED indacator light and push-to-test switch for mandated code compliance testing.
- Long life, maintenance free, rechargeable sealed NiCd battery.
- Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault.
- 90 Minute minimum emergency operating time over full temperature range (other run times available upon request).
- Output classification: Class 2 Compliant.
- Surge protection: Per C62.41 (TVS).
- Input overcurrent protection: Fusable link.
- 24 hour maximum battery recharge time.
HOUSING
- LED illuminated and remote mounted test switch.
- Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish.
MOUNTING
Suitable for installation inside, on top or in remote of the fixture.
WARRANTY & LISTING
- UL Classified for factory or field installation.
- Suitable for damp locations (0°C - 50°C).
- 5 year warranty on all electronics and housing.
- Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local andState codes.
RESOURCES AND DOWNLOADS
| SKU | BL-BLEDEM-CP |
|---|---|
| Weight | 4.00 LBS |
| Light Source | LED |
| Fixture Size | Other |
| Lumen Output | 800-2700 |
Reviews
Write a Review
