Premium quality low profile troffer with an almost limitless range of applications. Ideal for all commercial and industrial buildings requiring general illumination with recessed configurations.
Housing: 3 3/4” deep. Die formed standard or 20 gauge steel. Ends snap into housing or can be secured with #8 x 3/8” screw or 1/8” pop rivet with 1/8” to 3/16” grip (not included). Access plate snaps in for easy access. Flush steel door frame. Air intake slots and baffles are built into the ends of the door frame. White polyester polymer finish with a minimum 82% reflectivity. Designed for recess installation in exposed T-bar ceilings. Designed for concealed Z-bar ceilings. Leveling lugs (4 included) attached to each corner of body for use with conceiled Z-bar ceilings. Joiner connects and aligns ends of housing in continuous runs. It overlaps ends and is attached by bending tabs.
FEATURES & BENEFITS
- Housing embossed for maximum rigidity. Rounded side flanges for safe handling.
- Louvered heat removal slots on the back of the housing remove heat and prevent dust from entering the unit from the plenum
- Four corner tie points for safety wire supports
- Door frame hinges on end from either side of housing
- Prismatic lenses and all types of louvers can be fitted to door frame
- Optional damper screws onto outside of housing; controls air flow volume
RESOURCES AND DOWNLOADS
| SKU | ML-RGAIR-24LED |
|---|---|
| Weight | 16.00 LBS |
| Light Source | LED |
| Fixture Size | 2X4 |
| Driver Type | 120-277V Multivolt 0-10V Dimmable |
| Lumen Output | 4,130-8,265 |
| Color Temperature (CCT) | 4000K |
| Total Input Watts | 35 |
| Total Input Watts | 57 |
| Total Input Watts | 72 |
Reviews
Write a Review
