11” Square LED downlight with integral driver and LED module. It is designed for use in non-insulated ceilings or insulated ceilings. Insulation must be kept 3” away from all sides of the housing.

DESIGN FEATURES

Housing

• Galvanized steel housing, white painted.
• 5-15/16” height allows to use in 2“ x 6” joist construction.
• Housing adjusts for ceilings up to 1-1/4” thick.

Mounting Frame

• Galvanized steel construction.

Junction Box

• Listed for through branch circuit wiring. (Max.8 No 12 AWG 90ËšC branch circuit conductors. (4 in, 4 out)
• (5) 1/2” knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.

Bar Hangers

• Maximum extension by 24” allows excess distance between joists.
• Housing can be positioned at any point within 24” joist span.
• Score lines allow “tooless” shortening for 12” joists. Bar hangers may be repositioned 90 degrees.
• Integral T-bar clips snaps onto T-bars and no additional clips are required.

LED Power Supply

• Universal, 120~277 VAC input, high efficiency dimming drivers with â‘  Triac/ELV dimmer switches or â‘¡ Triac/ELV/0-10V dimmer switches.
• Drivers feature power factor >.90, THD <20% with integral thermal protection to sense over temperature or electrical issues.
• Driver mounts externally to the module to allow future replacement or upgrading if desired.
• Optional Lutron Hi-lume A-Series, LED drivers and EcoSystem 5-Series LED drivers are available. Lutron drivers provide flicker-free, smooth, continuous dimming down to 1% for Hi-lume and 5% for EcoSystem. (Contact factory for dimming system requirements)

Trim

• Steel white painted square trim with acrylic or glass lens.

Listing

• ETL listed for wet location.

Just-A-Nail

• Adjustable nail hanger bar for easy alignment.

Optional “Quick Connect” Push-in wire connectors.

• Three “Quick Connectors”
• Pre-installed push-in wire connectors for fast and easy wiring.