The ENERLITES MDC-50V is a commercial-grade line voltage ceiling mount sensor that operates lights using a combination of PIR and ultrasonic technologies. Ambient light level detection prevents the occupancy sensor from turning lights ON when the ambient light levels are sufficient. This ceiling sensor is compatible with either LED or fluorescent lights. The ceiling mount motion sensor is ideal for use in offices, classrooms, common areas, and other commercial areas.
Key Features and Benefits
- Passive Infrared (PIR) and Ultrasonic Technology
- 360° field of view
- DIP switch simplifies sensor adjustments
- Adjustable time delay from 30 seconds to 30 minutes
- Auto set time delay based on occupancy patterns
- Adjustable PIR/US sensitivity settings
- Adjustable ambient light level to keep load off
- Six trigger logic modes between PIR and Ultrasonic
- LED indicators light flashes when sensor detects motion via PIR/US to verify detection is active
- Zero-crossing for long relay life
- Sensor coverage tested to NEMA WD7-2000
Specifications
- Voltage: 120V AC / 277V AC, 50/60 Hz
- Resistive: 6.6 A
- Tungsten: 800W
- Electronic Ballast: 800VA @ 120V AC / 1600VA @ 277V AC
- Motor: 1/4 HP
- PIR Coverage: 1200 sq. ft.
- Ultrasonic Coverage: 1000 sq. ft.
- Warranty: 2 Years
Common Uses
Open office spaces, classrooms, common areas, and other commercial areas.
RESOURCES AND DOWNLOADS
360° Line Voltage Dual-Technology Occupancy Ceiling Sensor Spec Sheet
SKU | EN-MDC-50VW |
---|---|
Weight | 16.00 LBS |