Best Lighting BLEM-CP, 10.7 Watts

Compact and versatile emergency LED driver with 10.7 watts output, universal 120-277V input, and 90-minute operation time.

Key Features and Benefits

• Works with or without an AC driver to convert new or existing LED fixtures into unobtrusive emergency lighting.
• Provides constant power output to the load during emergency mode operation.
• Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures.
• Universal 120-277V, 50/60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
• Long-life, maintenance-free, rechargeable lithium iron phosphate battery.
• Output short/overcurrent protection with normal operation resuming upon removal of fault.
• 90-minute minimum emergency operating time over full temperature range.
• Output classification: Class 2 Compliant.
• Surge protection: Per C62.41 (TVS).
• Input overcurrent protection: Fusible link.
• 24-hour maximum battery recharge time.
• LED illuminated and remote mounted test switch.
• Low profile galvanized steel construction.
• Compact design allows for installation of non-conduit models inside most LED fixtures.
• Standard models suitable for inside or top mount of LED fixtures.
• Conduit models suitable for remote mount to LED fixture.

Specifications

• Output Power: 10.7 Watts
• Input Voltage: 120-277V, 50/60 Hz
• Output Voltage: 20-50V
• Output Current: 535-214 mA
• Emergency Operating Time: Minimum 90 minutes
• Battery: Lithium Iron Phosphate, maintenance-free
• Recharge Time: 24 hours
• Operating Temperature: 10°C - 55°C
• Certification: UL Listed, NFPA 101, NEC, OSHA, CEC Title 20
• Warranty: 5 years on electronics and housing

Common Uses

Ideal for use in commercial, industrial, and residential settings to ensure compliance with emergency lighting codes and regulations.