5.0 Watt constant-power emergency LED driver, operates normally-on, normally-off, or switched load fixtures, with universal 120-277V input and 90-minute emergency operation.

Key Features and Benefits

• Works with or without an AC driver to convert new or existing LED fixtures into unobtrusive emergency lighting.
• Provides constant power output to the load during emergency mode operation.
• Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures.
• Universal 120-277V, 50/60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
• Long-life, maintenance-free, rechargeable lithium iron phosphate battery.
• Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault.
• 90-minute minimum emergency operating time over full temperature range.
• Output classification: Class 2 Compliant.
• Surge protection: Per C62.41 (TVS).
• Input overcurrent protection: Fusible link.
• 24 hour maximum battery recharge time.

Specifications

• LED illuminated and remote mounted test switch.
• Low profile galvanized steel construction.
• Compact design allows for installation of non-conduit models, inside most LED fixtures.
• Standard models suitable for inside or top mount of LED fixtures.
• Conduit models suitable for remote mount to LED fixture.
• UL Listed for factory or field installation.
• Suitable for damp locations (10°C - 55°C).
• Five-year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.
• Certified to CEC under Title 20 regulations.

Common Uses

Ideal for converting new or existing LED fixtures into emergency lighting solutions in commercial, industrial, and institutional settings.