Best Lighting BLEM-CP-5C Constant-Power Emergency LED Driver, 5.0 Watts

Compact 5.0W emergency LED driver with long-life lithium battery, universal 120-277V input, and 90-minute minimum emergency operation.

Key Features and Benefits

• Works with or without an AC driver to convert new or existing LED fixtures into unobtrusive emergency lighting.
• Provides constant power output to the load during emergency mode operation.
• Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures.
• Universal 120-277V, 50/60 Hz input.
• Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
• Long-life, maintenance free, rechargeable lithium iron phosphate battery.
• Output short/overcurrent protection with electronic limiting, resuming normal operation upon fault removal.
• 90-minute minimum emergency operating time over full temperature range.
• Output classification: Class 2 Compliant.
• Surge protection per C62.41 (TVS).
• Input overcurrent protection with fusible link.
• 24-hour maximum battery recharge time.
• Low profile galvanized steel construction with LED illuminated and remote mounted test switch.
• Compact design allows for installation inside most LED fixtures.
• UL Listed for factory or field installation.
• Suitable for damp locations (10°C - 55°C).
• Five-year warranty on all electronics and housing.
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.
• Certified to CEC under Title 20 regulations.

Specifications

• Output Power: 5.0 Watts
• Input Voltage: 120-277V, 50/60 Hz
• Output Voltage: 20-50V
• Output Current: 250-100 mA
• Dimensions: 10-7/16" x 2-1/2" x 1-3/16"

Common Uses

Ideal for converting new or existing LED fixtures into emergency lighting, suitable for commercial, industrial, and residential settings.