Single Pole 180° PIR Occupancy/Vacancy Motion Sensor Wall Switch

Single pole 180° PIR occupancy/vacancy motion sensor wall switch, available in black, ivory, light almond or white finish, 120 Vac, 60 Hz voltage, neutral wire required.

Minimum order qty. of 10 pcs.

DESCRIPTION

The passive infrared sensors work by detecting the difference between heat emitted from the human body in motion and the background space. The sensor switch can turn a load on and hold it as long as the sensor detects occupancy. After no motion is detected for the set time delay, the load turned off automatically.

FEATURES

• Turn lights ON/OFF automatically (Occupancy Mode)
• Manual ON / automatically OFF (Vacancy Mode)
• Time delay from 15 seconds (test mode) to 20 minutes
• Neutral wire required

SPECIFICATIONS

• Voltage: 120 Vac, 60 Hz
• Incandescent: 500W
• Fluorescent: 500 VA
• LED Fixture: 150W
• Motor: 1/8 HP
• Time delay: 15 Sec to 20 Mins
• Operating Temperature: 32 F to 131 F

COVERAGE AREA

Best: 180 sq.ft.
Regular: 450 sq.ft.
Maximum: 700 sq.ft.

As illustrated in Figure 1, The HMOS has a 180° detection range with a maximum distance of 30’ detection in front of the sensor and 12’ on the sides providing 700 sq. ft. of coverage. For maximum results, the sensor must be properly installed between the height of 4’ to 5’ and away from obstructions such as walls, furniture and transparent barriers like Low-E glass.