0-10V MW 120-277 sensor dip white, 600 watt maximum, optional surface mounting and base mounting.
FEATURES
- Automatic switching or dimming when used in combination with 1-10V dimmable LED drivers or ballasts.
- Built-in daylight sensor
- 1-10V interface can match up with Merrytek stand-alone daylight sensor MS01 and achieve daylight harvesting.
- Compact size makes it suitable to fix within most luminaires.
- Detection area, time delay and daylight threshold can be precisely set via DIP switch.
- Wide detection area, range up to 16m in diameter.
- Support higher mounting height 12m Max.
- Optional surface mounting and base mounting
SPECIFICATIONS
- Operating voltage: 120~277Vac, 50Hz/60Hz
- Rated capacitive load: 400W@120V ; 1000W@277V(Ballast) 800W@120V ; 1000W@277V(Resistive)
- HF system: 5.8GHz+75MHz, ISM wave band
- Transmitting power: <0.5mW
- Power consumption: >0.5W (standby), <1W(operation)
- Detection zone: Max. (D x H): 16m x 12m
- Detection sensitivity: 10% / 50% / 75% / 100%
- Hold time: 5s / 30s/ 90s / 3min / 20min / +
- Daylight sensor: 2lux/5lux/ 10lux/ 25lux/ 50lux / 100lux / Disable
- Stand-by period: 0s / 5s / 5min / 10min / 30 min / 1h / +
- Stand-by dimming level: 10% / 20% / 30% / 50%
- Mounting height 15m Max.
- Motion detective: 0.5~3m/s
- Detetion angle: 150°(wall installation), 360°(ceiling installation)
- Operating temperature: -35°C~ 70°C
- IP rating: IP20
RESOURCES AND DOWNLOADS
SKU | WM-WEC-2MD-35 |
---|---|
Weight | 5.00 LBS |