Get 12% OFF Automatically When You Spend $2,000 or More No Code Required
Get 12% OFF Automatically When You Spend $2,000 or More No Code Required

FREE SHIPPING ON ORDERS OVER $1K

EXPERT LIGHTING ADVICE

VALUE ENGINEERED QUOTES

ROI ANALYSIS AND DESIGN SUPPORT

Flush Mount Decorative Ceiling Lights

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Flush Mount Ceiling Light Sizing: Diameter and Lumens by Room

Style grids do not answer the two questions every buyer actually has: what diameter, and how many lumens. The table below covers both, and it works the same for one bedroom fixture as it does for spec-matching a ceiling light fixture across 200 apartment units. Start with the numbers, then choose the finish.

RoomTypical Room SizeFixture DiameterLumen Target
Bedrooms, offices10 x 10 to 12 x 12 ft13 to 16 in1,500 to 2,500 lm
Kitchens10 x 12 ft and up14 to 19 in, often plus task lighting3,000 to 4,000 lm total
Living and common rooms12 x 18 ft and up15 to 22 in2,000 to 4,000 lm
Hallways and corridorsPer run11 to 14 in, spaced 8 to 10 ft1,000 to 1,600 lm per fixture
Bathrooms and laundry5 x 8 ft and up11 to 14 in1,500 to 2,000 lm, damp rated

A quick heuristic: the fixture diameter in inches should roughly match the room's diagonal measured in feet. A 10 x 12 room has about a 16 foot diagonal, which points to a fixture near 16 inches. Treat it as a starting point, not a rule. Large open plans need multiple fixtures rather than one oversized one, and rooms with strong daylight or layered lamps can size down without feeling dim.

Flush or Semi Flush: Decide by Ceiling Height

Under 8 foot ceilings, stay flush: the fixture hugs the ceiling and preserves headroom. At 8 to 10 feet, a semi flush fixture that drops 4 to 8 inches adds shadow detail and presence without hanging into the room. Above 10 feet, pendants and chandeliers usually serve the space better. If a property has mixed ceiling heights, standardizing on flush mount keeps one SKU working everywhere, which matters more than styling nuance when you are buying by the case.

Buying for Multifamily and Hospitality at Scale

Property managers replacing dated dome lights across a building have a different problem than a homeowner picking one fixture: consistency, availability over a multi-phase schedule, and ratings that survive every room type on the punch list. Two specs do the heavy lifting. Damp rated LED ceiling lights can go in baths, laundry rooms, and covered exterior corridors, so one fixture family covers the whole unit. CCT selectable fixtures with a switch for 2700K through 5000K let maintenance stock one SKU and match whatever color temperature the building standardized on. Dimming compatibility is standard on most models here; confirm the dimmer protocol on the spec sheet when pairing.

Styles That Hold Up in Commercial Settings

The selection spans drum shades, geometric forms, disc profiles, and transitional designs in brushed nickel, matte black, and white, from brands built for hospitality and multifamily duty rather than one-off decor. Kitchen ceiling lights lean toward higher output and 90 CRI options; corridor fixtures favor sealed diffusers that keep insects and dust off the lens. Every product page carries the specs this page summarizes: diameter, delivered lumens, CCT, location rating, and dimming.

For fixtures that drop slightly below the ceiling plane, see Semi-Flush Mount Decorative Fixtures. Ultra thin Disc Lights and Wafer Lights cover shallow plenums, the parent Decorative Ceiling Lights section holds both families, and Bathroom and Vanity Lights completes unit turns.

Related Categories

Semi-Flush Mount Decorative Fixtures

Semi-Flush Mount Decorative Fixtures
Disc Lights and Wafer Lights

Disc Lights and Wafer Lights
Decorative Ceiling Lights

Decorative Ceiling Lights
Surface Mount Ceiling Lights

Surface Mount Ceiling Lights
Bathroom and Vanity Lights

Bathroom and Vanity Lights

Frequently Asked Questions

Match the fixture diameter in inches to the room's diagonal in feet as a starting point: a 10 x 12 foot room has roughly a 16 foot diagonal, which suggests a fixture near 16 inches. Bedrooms typically land at 13 to 16 inches, hallways at 11 to 14 inches, and large living areas at 15 to 22 inches. Very large or open plan spaces do better with multiple fixtures than one oversized unit.

Plan around 1,500 to 2,500 lumens for bedrooms and offices, 3,000 to 4,000 total lumens for kitchens, and 1,000 to 1,600 lumens per fixture in hallways spaced 8 to 10 feet apart. Rooms with strong daylight or layered floor and table lamps can run lower. Check delivered lumens on the fixture spec sheet rather than lamp wattage, since optics and diffusers change the output that reaches the room.

Ceiling height decides it. Under 8 feet, stay with a flush mount to preserve headroom. Between 8 and 10 feet, a semi flush fixture dropping 4 to 8 inches adds depth and presence without intruding into the space. Above 10 feet, pendants or chandeliers usually suit the volume better. Properties with mixed ceiling heights often standardize on flush mount so a single SKU works everywhere.

Yes, if the fixture is damp rated. Bathrooms, laundry rooms, and covered exterior corridors expose fixtures to humidity, and the UL damp location listing covers that condition. A dry rated fixture over a shower filled bathroom will fail early and can void coverage. Many of the fixtures in this category carry damp ratings, which lets one fixture family serve every room in a unit turn.

CCT selectable fixtures include a switch, usually on the fixture body, that sets the color temperature at install time, commonly across 2700K, 3000K, 3500K, 4000K, and 5000K. For property managers this collapses inventory: maintenance stocks one SKU and matches whatever color standard the building uses. It also removes the risk of mixed color temperatures showing up in the same corridor after piecemeal replacements.

Most LED flush mount fixtures in this category support dimming, but the dimmer must match the fixture's driver. TRIAC compatible models work with common forward phase dimmers, while some fixtures specify ELV dimmers for smooth low end performance. The spec sheet lists compatible dimmer types and the tested dimming range. Pairing an untested dimmer is the usual cause of flicker complaints after a retrofit.

Standardize on one fixture family with damp rating and selectable CCT, confirm the manufacturer can supply the full quantity across your phases, and record the chosen CCT setting in the project spec so every installer sets it the same way. Ordering samples for one unit first, then releasing the balance, catches diffuser and finish mismatches before they multiply across hundreds of rooms.