Emergency LED Driver

FEATURES

• Meet most of safety standards for lighting
• Standard CSA C22.2 NO.141、UL924
• External LiFeP04 battery
• Battery protections : over charge protection、over discharge protection 、short circuit protection
• Indicator shows a variety working modes
• The batteries Meet 500 cycles of standard CH and standard DCH
• RoHS ompliant
• Emergency 1.5 hours

SPECIFICATIONS

• Universal Input Voltage
  100 277Vac 50 60Hz
• AC Input Current
  100mA max.
• AC Input Power Rating
  7.0W max.
• Output Current and Voltage
  200-400mA 25 48Vdc
• Output Power
  10W max.
• Emergency Time
  ≥1.5H
• Full Warranty
  3 Years
• Test Switch Indicator Light
  Illuminated Test Switch,
  indicator Light
• Battery
  LiFeP04 battery-6.4V/3000mAh
• Battery Charging Current
  250mA
• Charging Time
  ≥24Hours
• Temperature Rating Ambient
  0°C to 50°C (32°F to 122°F)
• Dimensions
  7.4''x1.5''x1.1'' 188mmx38mmx29mm
• Weight
  0.83bs(0.38kg)

OPERATION

AC Operation:
AC power is present,The LED load from the LED driver is normal power supply, AC LED driver output current can not exceed 150W or 4A, the emergency driver is charging in a standby mode, The green LED light on to indicate that it is charging.

Emergency operation:
When the AC power goes out, The emergency driver detects the AC power outage and automatically switch to the working emergency mode. The green LED light off. When the AC power is restored, the emergency driver backs to AC power working and starts re-charging, the green LED light on.