Get 12% OFF Automatically When You Spend $2,000 or More No Code Required
Get 12% OFF Automatically When You Spend $2,000 or More No Code Required

FREE SHIPPING ON ORDERS OVER $1K

EXPERT LIGHTING ADVICE

VALUE ENGINEERED QUOTES

ROI ANALYSIS AND DESIGN SUPPORT

Chandeliers

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Sizing is the decision that makes or breaks a chandelier purchase, and it is the step most chandelier retailers skip entirely. Before you compare arms and finishes, work out the diameter, the hanging height, and the structural support the space requires. The math below covers everything from a 36 inch dining table to a two-story foyer and a hotel lobby, so you can spec the fixture once and hang it without rework.

How to Size Chandeliers for Dining Rooms, Foyers, and Lobbies

The baseline formula is simple: add the room's length and width in feet, then read that number as the chandelier diameter in inches. A 12 by 14 ft dining room points to a fixture roughly 26 inches across. Over a table, size to the table instead of the room; a diameter between one half and two thirds of the table width keeps the fixture proportional and clear of sight lines. Large volumes scale by height as well: figure 2 to 3 inches of fixture height for every foot of ceiling height, which is how a 20 ft lobby ends up with a 40 to 60 inch tall centerpiece.

SpaceDiameter RuleHanging Height
Dining room chandelier over a table1/2 to 2/3 of the table widthBottom 30 to 36 in above the tabletop at 8 ft ceilings; raise about 3 in per extra foot of ceiling
Open room or great roomRoom length plus width in feet, read as inchesMinimum 7 ft of clearance below the fixture
Two-story foyerLength plus width formula; fixture height 2 to 3 in per foot of ceilingBottom above the second-floor sightline; center in a front-facing window where one exists
Hotel lobby or banquet hallScale to ceiling height and seating layout; slightly oversized reads intentional, undersized reads lostKeep 8 ft minimum over circulation, higher over furniture groupings

Mounting Support: Box Ratings, Braces, and Sloped Ceilings

A standard listed ceiling box supports a fixture up to 50 pounds, and multi-arm and crystal chandelier designs pass that threshold fast once lamps and crystal are hung. NEC 314.27 requires anything heavier to be supported independently of the box or hung from a box listed for the load, so check the shipping weight against the box rating during rough-in, not after the ceiling is closed. Brace-style boxes sold for ceiling fans carry the higher ratings and retrofit between joists; see our ceiling fan support boxes. On sloped ceilings, confirm the canopy is rated for the pitch or add a sloped-ceiling adapter, and order chain or adjustable rod sets long enough to bring the fixture level and to height.

Commercial Chandelier Logistics

Chandeliers in lobbies, banquet halls, churches, and multifamily amenity spaces raise questions no residential guide covers. Who relamps the fixture at 24 ft, and from what equipment? Large-venue installs should settle on a lift path or a winch-lowered fixture at design time, because scaffolding a finished lobby for a lamp change is a real cost that shows up every few years. Confirm the dimming protocol up front as well: most chandelier light packages here accept dimmable LED lamps in E12 candelabra or E26 medium bases, and scene control is a wiring decision, not an afterthought.

Styles That Carry the Space

Traditional crystal chandeliers still anchor upscale hospitality interiors, while linear, ring, and cluster designs read cleaner in modern lobbies and work well among contemporary dining room light fixtures. If one large fixture is not the answer, multipoint pendant lighting spreads the same visual weight across a canopy of pendants, and mini pendant lights layer in over bars and counters. Very large spaces can go contemporary with large scale pendant fixtures. Browse the full decorative pendant lighting range for the adjacent families, and lamp candelabra sockets from our chandelier bulbs selection.

Need pricing on a hospitality or multifamily package? Send the fixture schedule and we will quote the full chandelier line item, mounting hardware included, in one pass.

Frequently Asked Questions

Add the room's length and width in feet and use that number as the diameter in inches, then check it against the table: the fixture should span one half to two thirds of the table width. A 12 by 14 ft room with a 42 inch table lands at 24 to 28 inches of diameter. When the two rules disagree, size to the table, since that is where the fixture is actually seen.

Set the bottom of the fixture 30 to 36 inches above the tabletop with an 8 ft ceiling, and raise it about 3 inches for each additional foot of ceiling height. The goal is clear sight lines across the table with the fixture still reading as part of the setting. In open circulation areas, keep at least 7 ft of clearance below the fixture.

Only up to 50 pounds. NEC 314.27 requires fixtures heavier than that to be supported independently of the outlet box or hung from a box listed for the load. Many multi-arm and crystal designs exceed 50 pounds once lamps and crystal are installed, so verify the shipping weight and spec a brace-style box or structural blocking during rough-in.

Start with the length plus width formula for diameter, then size fixture height at 2 to 3 inches per foot of ceiling height, so an 18 ft foyer suits a fixture roughly 36 to 54 inches tall. Keep the bottom of the fixture above the sightline from the second-floor landing, and center it in the upper window if the foyer has one facing the street.

Most fixtures in this category use E12 candelabra or E26 medium base sockets and run dimmable LED lamps without modification. Confirm the dimmer is rated for LED loads and listed as compatible with the lamp family you choose, since pairing legacy incandescent dimmers with LED lamps is the most common cause of flicker in dining room and hospitality installs.

Three things: structural support (fixture weight against the box rating or independent support per NEC 314.27), maintenance access (a lift path or winch lowering for relamping at height), and the dimming protocol for scene control. Confirm all three at design time; they are inexpensive on paper and expensive to retrofit after the ceiling is closed.

Use a sloped-ceiling canopy or adapter rated for the pitch, then set height from the fixture's lowest point: at least 7 ft of clearance in walking areas, or 30 to 36 inches above a tabletop. Chain-hung and adjustable-rod fixtures level far more easily on a slope than fixed-stem designs, so favor those for vaulted rooms.