Get 12% OFF Automatically When You Spend $2,000 or More No Code Required
Get 12% OFF Automatically When You Spend $2,000 or More No Code Required

FREE SHIPPING ON ORDERS OVER $1K

EXPERT LIGHTING ADVICE

VALUE ENGINEERED QUOTES

ROI ANALYSIS AND DESIGN SUPPORT

Bathroom and Vanity Lights

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Vanity lighting specs fail in two places the style-focused retailers never mention: ADA projection limits in circulation paths and listing ratings by mounting zone. Both come up on every multifamily and hospitality job, and both are cheap to get right at order time. Start with sizing, then check the two compliance boxes before the finish schedule locks.

How to Size Bathroom Vanity Lights

For an over-mirror bar, target roughly 75 percent of the mirror width so the fixture reads centered without overhanging the glass. For side-mounted sconces, center the fixtures at eye level and flank the mirror so light reaches both sides of the face. The table gives the working numbers.

Mirror or Vanity WidthOver-Mirror Fixture WidthMounting Height
24 in18 to 22 inCenter the bar 75 to 80 in above finished floor
30 in22 to 26 inSame
36 in26 to 30 inSame
48 in32 to 40 inSame
60 in double vanityTwo smaller bars, or one 40 to 50 in fixtureSame
Side sconces, any mirrorPairs flanking the mirrorCentered 60 to 66 in above finished floor, 28 to 40 in apart

ADA Projection Limits in Circulation Paths

Wall-mounted objects with leading edges between 27 and 80 inches above the floor may project no more than 4 inches into a circulation path along an accessible route. That rule catches vanity light fixtures in public and common-use restrooms across multifamily, hospitality, and office projects, where a deep decorative sconce beside the door becomes a protruding object violation. Where the fixture sits over the vanity and outside the circulation path, deeper profiles are fine; where it borders the route, spec low-profile bodies and verify against ICC A117.1 and the ADA Standards for your project type.

Damp and Wet Listings by Mounting Zone

Check the zone, not the room. A fixture over a vanity outside the shower footprint needs a damp location listing, which most bathroom light fixtures in this category carry. Inside a tub or shower zone, where the fixture is subject to spray, the listing must be wet location. The distinction matters most on compact hotel and multifamily baths where a single bar can end up within the tub zone on the drawings. Coordinate GFCI protection for the bathroom circuit per NEC 210.8 while the electrical package is open.

CRI 90 Light for Grooming Tasks

Grooming is a color-critical task: makeup, shaving, and wardrobe checks all happen at this mirror. Spec 90+ CRI bathroom vanity lights for hotel guest baths, locker rooms, and unit bathrooms, in the 2700K to 3500K range depending on the property's design language. Placement does the rest: side sconces or a long horizontal bar spread light across the face and kill the under-eye shadows that a single ceiling point creates. Good bathroom lighting at the mirror is a guest-review line item, and it costs the same as bad lighting at spec time.

Multifamily and Hospitality Packages

Unit-count projects need one SKU family across every bath: consistent CCT, consistent finish, and a supply line that can deliver phase by phase. Send the unit count and finish schedule for a volume quote. For the adjacent families, see decorative wall sconces for the dressier profiles, wall mounted cylinders for architectural wall lighting, the parent wall sconces category, and backlit lighted vanity mirrors where the mirror and the light are one fixture.

Frequently Asked Questions

Target roughly 75 percent of the mirror width for an over-mirror bar, which puts a 36 inch mirror at a 26 to 30 inch fixture. If the vanity is wider than the mirror, size to the mirror, since that is the visual anchor. For double vanities around 60 inches, two smaller bars over each sink usually light faces better than one long fixture.

Center an over-mirror bar 75 to 80 inches above the finished floor, which lands it just above a standard mirror. Side-mounted sconces center at eye level, 60 to 66 inches above the floor, spaced 28 to 40 inches apart flanking the mirror. On accessible units, confirm the fixture body stays within ADA projection limits if it borders a circulation path.

In a bathroom, yes: a damp location listing is the baseline for fixtures over the vanity and outside the shower footprint. Fixtures inside a tub or shower zone, where spray can reach them, need a wet location listing instead. The listing appears on the fixture label and spec sheet, and the deciding factor is the mounting zone on the drawings, not the room type.

CRI measures how faithfully a light source renders color, and the vanity mirror is where occupants perform their most color-critical tasks: makeup, shaving, and wardrobe checks. At 80 CRI, skin tones shift visibly; at 90+ CRI they read true. For hotels and multifamily properties, 90+ CRI at the mirror is one of the cheapest guest-experience upgrades in the lighting package.

Along accessible routes, wall-mounted objects with leading edges between 27 and 80 inches above the floor may project a maximum of 4 inches into the circulation path. Vanity fixtures directly over the counter usually sit outside the path, but sconces near doors and passage walls are frequent violations. Check fixture depth against ICC A117.1 and the ADA Standards during submittal review, not after install.

Side sconces flanking the mirror light the face most evenly, because illumination arrives from both sides at eye level with minimal shadowing. A horizontal bar above the mirror is the practical default where wall space is tight or mirrors are wide, and a long bar softens shadows well. The weakest option is a single ceiling point behind the user, which shadows everything that matters.

A typical single-sink vanity does well with roughly 1,600 to 2,400 delivered lumens at the mirror, split across the fixture or sconce pair. Double vanities scale up proportionally. Output requirements drop when surfaces are light-colored and rise with dark tile and matte finishes. Pair the lumen target with 90+ CRI and a consistent CCT across every bath in the project.