Get 12% OFF Automatically When You Spend $2,000 or More No Code Required
Get 12% OFF Automatically When You Spend $2,000 or More No Code Required

FREE SHIPPING ON ORDERS OVER $1K

EXPERT LIGHTING ADVICE

VALUE ENGINEERED QUOTES

ROI ANALYSIS AND DESIGN SUPPORT

Outlets

Products List

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Contractors buy outlets by grade, and grade is exactly what most outlet category pages hide. The comparison below covers what actually changes between residential, commercial, and hospital grade devices, then maps the NEC sections that dictate outlet type by location.

Electrical Outlets by Grade

GradeWhat ChangesWhere It Belongs
Residential gradeLight-duty contacts and mounting strap, priced for volumeSingle-family homes and low-traffic circuits
Commercial and spec gradeHeavier contact material, stronger blade grip, higher cycle life, back-wire and side-wire optionsOffices, schools, retail, and any facility where a wall outlet sees daily plug cycles
Hospital gradeGreen dot marking; passes UL 498 supplemental tests for ground pin retention and abusePatient care spaces per NEC 517, plus anywhere maximum plug retention is worth the cost

The failure mode of an undersized grade is a receptacle that quits gripping plugs, and in a tenant space the labor to swap a failed duplex receptacle dwarfs the price gap between grades. Facilities that standardize on spec grade for every general-use power outlet rarely revisit the decision; facilities that cheap out revisit it one service call at a time.

Where the Code Dictates the Outlet

Three NEC sections drive most selections. NEC 210.8 sets GFCI locations, bathrooms, kitchens, outdoors, garages, and more; the full location chart lives on our GFCI outlets page. NEC 406.12 requires tamper-resistant receptacles across dwelling units and in childcare facilities, hotel and motel guest rooms, waiting areas, and similar occupancies where children are expected. NEC 406.9 requires weather-resistant (WR) devices with appropriate covers in damp and wet locations. Pull the code edition in force for the jurisdiction and cite the section on the submittal; inspectors respect a package that shows its work.

A One-Minute NEMA Primer

Most commercial general-use work runs on two configurations. NEMA 5-15R is the standard 15A, 125V electrical outlet found through offices and homes; NEMA 5-20R adds the T-slot neutral for 20A circuits serving equipment and small-appliance loads. A 15A duplex is permitted on a 20A branch circuit when the circuit serves more than one receptacle, which a duplex satisfies on its own. Beyond those two, the full configuration table covering 240V, locking, range, dryer, and EV patterns lives on our receptacles page.

Completing the Device Package

A wall outlet order rarely ships alone. USB combination and connected devices live under smart wiring devices, and structured cabling jacks under DataCom keep power and data outlets on one finish schedule. Finish-matched wall plates close out every opening, and the upstream switching and dimming lives in the parent controls and devices category. Color consistency across a floor plate is a real spec item: white, ivory, light almond, gray, and black should be called out per room on the schedule, not left to the truck stock.

Buying for a full building? Send the device schedule and we will quote electrical outlets, plates, and controls by grade and finish in one contractor-priced package.

Frequently Asked Questions

Contact material and cycle life. Commercial and spec grade receptacles use heavier contacts, stronger blade grip, and sturdier mounting straps, so they keep holding plugs firmly after years of daily insertions. Residential grade devices are built to a price for low-traffic circuits. In any facility where outlets see constant use, the grade difference shows up as service calls, not as a line-item saving.

A hospital grade receptacle passes supplemental UL 498 requirements for ground pin retention, blade retention, and physical abuse, and carries a green dot on the face. NEC 517 requires hospital grade devices in patient care spaces, but they also earn their cost anywhere a dropped plug is unacceptable, such as labs, imaging suites, and equipment-critical areas.

NEC 406.12 requires tamper-resistant receptacles throughout dwelling units, and in childcare facilities, preschools, hotel and motel guest rooms, waiting rooms, gyms, and similar occupancies where children are expected. TR devices use internal shutters that open only when both blades insert together. Multifamily and hospitality projects should assume TR as the default device and except only what the code allows.

Yes, when the circuit serves more than one receptacle, and a single duplex receptacle counts as two. That is why 15A duplex devices are standard on 20A general-use circuits. A circuit serving a single receptacle must match the rating, and equipment with a 20A plug needs a 5-20R T-slot device. When in doubt, check the equipment plugs on the schedule.

The standard two-outlet device that fills most wall openings: one yoke, two receptacle faces, installed in a single-gang box. Variants include single receptacles for dedicated equipment, decorator-style rectangular faces that pair with matching plates, and combination devices that add USB ports or switches. Most commercial floor plates are 90 percent duplex receptacles, which is why grade selection on the duplex drives the budget.

Wherever NEC 210.8 lists the location: bathrooms, kitchens, outdoors, garages, laundry areas, near sinks, and more, in both dwelling and commercial occupancies. One GFCI device wired feed-through can protect downstream standard receptacles on the same circuit, so the answer is often one GFCI plus standard devices, not GFCIs everywhere. The full location chart is on our GFCI outlets page.

Yes. NEC 406.9 requires weather-resistant (WR) receptacles in damp and wet locations, which covers outdoor installations, and wet locations also need extra-duty in-use covers that stay sealed while a cord is plugged in. WR devices use corrosion-resistant contacts and UV-stable faces. Combine the WR receptacle, the correct cover, and GFCI protection per 210.8 for a compliant outdoor outlet.