Our Blog

MaxLite's FlatMax G6 turns three separate flat panel SKUs into one line item on a takeoff: 1x4, 2x2, and 2x4, all on the same controls-ready platform, all with CCT and wattage set in the field instead of locked at the factory. That matters on a real relamp job, where a building running corridor troffers, office grids, and open-area panels usually means three part numbers to track instead of one. The line carries DLC Premium efficacy up to 150 LPW Read more MaxLite MLFP Series: FlatMax G6 Flat Panels

Enerlites has trade pricing live on devices RelightDepot customers reorder often: a self-test GFCI receptacle, a high bay occupancy sensor built for line voltage PIR control, a duplex receptacle with built-in USB-A charging, and a matte white tamper-resistant receptacle with a wall plate combo. The pricing runs through August 31. Where These Parts Actually Show Up on a Job These four parts don't belong to one trade category. They show up on diffe Read more Enerlites Trade Pricing This August: GFCI, Sensor, and USB Receptacles

Lotus LED's 5CCT COB tape line ships as two SKUs on one driver platform: a dry-location strip and a sealed, wet-rated strip, both selectable across the same five color temperatures, 2700K, 3000K, 3500K, 4000K, and 5000K. That selection happens at the driver, not the tape, and both models run COB construction with a CRI of 90 or higher, so neither shows a hotspot whether it lands in a finished channel or bare against a cedar wall. Pair the wrong d Read more Tunable White COB Tape Lighting: Picking the Right Model

RelightDepot has trade pricing live right now on four Enerlites devices that most electrical contractors keep in the truck or the shop bin year-round: a self-test GFCI receptacle, a 180-degree PIR occupancy/vacancy sensor, a tamper-resistant decorator receptacle, and a decorator switch. The pricing runs through July 31, so if any of these four fixtures are already on your reorder list, this is the week to place it. What the Promotion Covers The Read more Enerlites Trade Pricing on GFCIs, Sensors, and Switches Closes July 31

The AE Switch Series puts full field control over wattage, CCT, and distribution into one MaxLite Value Series platform. Instead of ordering a fixed Type III, IV, or V distribution pattern at a fixed color temperature, the installer sets the configuration on site, and the newest AE Switch fixtures add a ground-level remote that changes CCT and distribution even after the area light is mounted and energized. Electrical contractors standardizing a Read more MaxLite AE Switch Area Lights: Now with Remote CCT and Distribution Control

The SCR series is Westgate's architectural round suspended pendant platform built for commercial and hospitality interiors where the architect or engineer specifies a single pendant family across multiple zones, ceiling heights, and output levels without a separate submittal for each configuration. The conventional approach to this problem is a different fixed-wattage, fixed-CCT catalog number for every zone, which means a new purchase order ever Read more SCR Round Pendant Series, MCTP5 model from Westgate

The LAX Series is Westgate's dynamic beam-adjustable area light platform, built for commercial and industrial outdoor projects that need a single fixture family to cover multiple zones, mounting heights, and output levels without a separate submittal for each configuration. Unlike fixed-wattage shoebox fixtures that require a distinct SKU for every wattage point and a separate model for each beam pattern, the LAX is built on a common platform acr Read more Westgate LAX Series: Beam-Adjustable Area Lights for Commercial Sites

Most mixed-facility jobs default to a separate strip light SKU for every wattage and CCT call: split lead times, multiple submittals, and more line items than the job needs. The MaxLite LS3 Series cuts that down to one controls-ready platform across three sizes (2, 4, and 8 ft), with field-selectable wattage and CCT built into every unit. Here is what the line covers, how to pick within it, and what to confirm before you commit to a rough-in. Fi Read more MaxLite LS3 Series: Field-Selectable LED Strip Light

Outdoor lighting scopes usually pull from at least three fixture categories. A commercial site retrofit might need area fixtures on poles covering the parking field, flood fixtures mounted on the building structure, and wall fixtures at entry points and egress locations. When those come from different product families, the takeoff has more line items, the submittal touches multiple product lines, and the install crew works with different mounting Read more Product Spotlight: M Series Area, Flood, and Wall Lighting

The LCFG Series is built for commercial interiors where decorative pendants survive real coordination, procurement, and turnover conditions. In hospitality, restaurant, lobby, and mixed-use projects, globe pendants rarely stay confined to one space type. The same fixture family often ends up spanning reception areas, dining zones, corridors, lounges, and amenity spaces where finish consistency and mounting alignment become more important than the Read more Product Spotlight: LCFG Series Architectural Globe Pendants