Our Blog

The FDLO Series ships as a 32.5-inch oval double-ring flush mount with a field-select switch that sets 2700K, 3000K, 3500K, 4000K, or 5000K on install day. Every finish shares the same 48W DOB driver, IP44 damp-location housing, and 120-degree beam. Miss the CCT call before the corridor ceiling closes up, and the fix is a flip of a switch on install day, not a return authorization. Two kinds of orders keep this series moving: a property managemen Read more FDLO Series Oval Flush Mount

MaxLite's FlatMax G6 turns three separate flat panel SKUs into one line item on a takeoff: 1x4, 2x2, and 2x4, all on the same controls-ready platform, all with CCT and wattage set in the field instead of locked at the factory. That matters on a real relamp job, where a building running corridor troffers, office grids, and open-area panels usually means three part numbers to track instead of one. The line carries DLC Premium efficacy up to 150 LPW Read more MaxLite MLFP Series: FlatMax G6 Flat Panels

A 40W or 60W wall pack over a service door does more than light the door. It casts a glare across the lot and emits more light than a small entry needs. The LMW mini cutoff wall pack line exists for the jobs where a full-size wall pack is the wrong fixture: entryways, alleys, loading docks, pathways, balconies, and small retail bays. It delivers 1300 lumens at 12W in a die-cast housing about the footprint of a large deadbolt plate. Season 2 prici Read more LED Mini Cutoff Wall Packs: Westgate LMW Series

Lotus LED's 5CCT COB tape line ships as two SKUs on one driver platform: a dry-location strip and a sealed, wet-rated strip, both selectable across the same five color temperatures, 2700K, 3000K, 3500K, 4000K, and 5000K. That selection happens at the driver, not the tape, and both models run COB construction with a CRI of 90 or higher, so neither shows a hotspot whether it lands in a finished channel or bare against a cedar wall. Pair the wrong d Read more Tunable White COB Tape Lighting: Picking the Right Model

The SLE-EL step light ships as five fixtures in one box. Set the field-select switch to 2700K, 3000K, 3500K, 4000K, or 5000K on install day, on the same 3W integrated LED module, IP65 wet-location polycarbonate housing, and 120-degree beam that every SKU in the line shares. Get the CCT wrong on a building, and fixing it is a two-second flip of a switch, not a return authorization. Two kinds of orders keep this series moving: a facility team stand Read more Westgate SLE-EL Step Lights: Voltage, Finish, and CCT Guide

Westgate's LFX Multi-Power Flood Light does something most fixtures on a takeoff sheet can't: it changes its own wattage. Set the driver to 50W, 80W, 100W, or 150W before it goes live, and the same die-cast aluminum body, rated IP65 with 10KV surge protection, pushes up to 21,400 lumens at 135 LPW, whichever tier the job calls for. No separate SKU for the loading dock versus the pathway. One fixture flexes to both. That flexibility matters most i Read more Westgate LFX Multi-Power Flood Light: One Fixture, Four Wattages

The AE Switch Series puts full field control over wattage, CCT, and distribution into one MaxLite Value Series platform. Instead of ordering a fixed Type III, IV, or V distribution pattern at a fixed color temperature, the installer sets the configuration on site, and the newest AE Switch fixtures add a ground-level remote that changes CCT and distribution even after the area light is mounted and energized. Electrical contractors standardizing a Read more MaxLite AE Switch Area Lights: Now with Remote CCT and Distribution Control

Most mixed-facility jobs default to a separate strip light SKU for every wattage and CCT call: split lead times, multiple submittals, and more line items than the job needs. The MaxLite LS3 Series cuts that down to one controls-ready platform across three sizes (2, 4, and 8 ft), with field-selectable wattage and CCT built into every unit. Here is what the line covers, how to pick within it, and what to confirm before you commit to a rough-in. Fi Read more MaxLite LS3 Series: Field-Selectable LED Strip Light

Flush mount fixtures like the FLT Series are built for projects where clean surface-mounted lighting has to work within existing ceiling conditions, limited rough-in flexibility, and fast turnover schedules. Corridors, stairwells, multifamily common areas, hospitality back-of-house, and renovation packages all create the same problem: the ceiling condition is already deciding the fixture before procurement starts. The value is not appearance. It Read more Product Spotlight: ATG’s Field Adjustable Flush Mount Luminaire (FLT Series)

We're excited to announce the latest Sunlite Featured DCO Specials, offering limited-time pricing on selected lighting products that are ready to ship. These deals are available now with immediate stock, but the special prices are only locked in while supplies last through May 8. If you're planning upcoming installs, service calls, or restocking commonly used fixtures, this is a great opportunity to secure Sunlite products at competitive pricing Read more Sunlite DCO Specials: Limited-Time Pricing, Valid through May 8